======================================================================
 Packet Intercom N-8000 Software Ver. 4.0.0
                                                    Dec 26, 2013
======================================================================

Thank you for downloading the TOA Packet Intercom N-8000 Software
Ver. 4.0.0.


The N-8000 Software Ver. 4.0.0 (the "Software" herein) is the dedicated
Software for TOA's N-8000 Series Packet Intercom.

This file contains the following information:

1. Guidance on the License Agreement
2. About this software
3. Notes on software version upgrade
4. How to upgrade the software version


1. Guidance on the License Agreement
----------------------------------------------------------------------

You need to consent to the conditions set out in the License Agreement
when using the N-8000 Software to upgrade your PC. Please read the
file "license.txt" contained in the same decompressed folder before
upgrading.


2. About this software
----------------------------------------------------------------------

The N-8000 software program is for performing system settings built
with the product of N-8000 series.

This expanded Version 4.0.0 has following enhanced feature: 
- N-8610RM, SX-200IP and RS-442 compatible

This expanded Version 3.1.0 has following enhanced feature: 
- Enhancement of the speaker selection and the contact output function of N-8640DS

This expanded Version 3.0.0 has following enhanced feature: 
- N-8600MS and N-8640DS compatible

This expanded Version 2.10 has following enhanced feature: 
- N-8616MS compatible

This expanded Version 2.03 has following enhanced feature: 
- Fault correction of read processing from cfg file and downloaded data.
- Fault correction of input level setting of N-8000AF.

This expanded Version 2.02 has following enhanced feature: 
- Addition of automatic daylight saving time(summer time) function.
- Change the destination to save system data into pi8 file.

This expanded Version 2.01 has following enhanced feature: 
- Addition of VS-900 system function.
- N-8000RS/CO/AL/AF/DI compatible

This expanded Version 1.41 has following enhanced feature: 
- Fault correction of the writting error in Korean series

This expanded Version 1.40 has following enhanced feature: 
- N-8000 Korean Sereise compatible
- Enabled to work on Windows Vista

This expanded Version 1.38 has following enhanced feature: 
- Fault correction of the configuration file broken when downloading
data

This expanded Version 1.37 has following enhanced feature: 
- Addition of call- and talk- interlocked contact output function 
settings
- Addition of remote dial control function settings
- Addition of system diagnosis function settings

This expanded Version 1.36 has following enhanced feature: 
- Improvement of importing equipment data detected
- Fault correction of operation failure after scanning unit without 
connecting to network
- Fault correction of 10th and 12th terminal setting of scan monitor 
group 1

This expanded Version 1.35 has following enhanced feature: 
- Fault correction of that "Configration" button doesn't become 
effective after scanning unit

This expanded Version 1.34 has following enhanced feature: 
- Addition of "Save" menu to Unit scan
- Improvement of error check after downloading data
- Maintain NAPT settings when changing type

This expanded Version 1.33 has following enhanced feature: 
- Fault correction of operation failure after scanning unit
- Fault correction of uploading settings when NAPT used

This expanded Version 1.32 has following enhanced feature: 
- Fault correction of abnormally termination after scanning unit
- Fault correction of station password settings
- Fault correction of oneshot make time settings
- Display fault correction of a station number when downloading data 
without station number
- Fault correction of change in the system name with different capital 
letter and small letter

This expanded Version 1.31 has following enhanced feature: 
- Fault correction of abnormally termination when downloading when 
the password and is different

This expanded Version 1.30 has following enhanced feature: 
- N-8500MS, N-8540DS and N-8010EX compatible
- Fault correction of abnormally termination when uploading and 
downloading
- Improvement of error check at the time of data storage and reading

This expanded Version 1.22 has following enhanced feature: 
- Collectively setting of Paging and Group settings displayed by table
  form
- Addition of "New", "Open" and "Save as" menu to system settings
- Collectively setting of station type, number, and name
- Fault correction of aux input paging settings of multi-interface
- Fault correction of bgm input of exchange, door remote and calling
  party indication settings of station
- Fault correction of group block
- Correction of upper bound of Remote response group to 16
- Fault correction when group call overlaps with the called party 
  indication settings
- Fault correction of master calling settings 
- Fault correction of registration of door station to scan monitor 
  group

This expanded Version 1.21 has following enhanced feature: 
- Display fault correction of a group blocking settings
- Fault correction at the time of the clearance of a remote response 
  group member, a bgm input, a door remote, or a calling party 
  indication
- Fault correction of a Group blocking settings

This expanded Version 1.20 has following enhanced feature: 
- N-8000MI (Multi interface unit) compatible
- The number restriction addition of characters of a password (one or
  more characters)
- Display fault correction of a Sampling frequency correction settings

This expanded Version 1.10 has following enhanced feature: 
- N-8050DS (Door station) compatible


3. Notes on software version upgrade
----------------------------------------------------------------------
This program has been designed based on the following components. 
Please get these components from Microsoft Download Center.
- Microsoft .NET Framework 3.5 SP1
  (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=d0e5dea7-ac26-4ad7-b68c-fe5076bba986)
- Microsoft SQL Server 2005 Express Edition
  (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=3181842a-4090-4431-acdd-9a1c832e65a6)

To use new functions enabled by the version upgrade, all of the
equipment in the system must be upgraded to the latest firmware.
Our latest Firmware and "N-8000 Series 
Installation/Operation Manual," which are necessary for the upgrade 
setting, are made available. 
Please use them by downloading from our product information download
site(http://www.toa-products.com/international/). 

Your upgrade operation does by no means adversely affect data settings
performed and password for your PC.


4. How to upgrade the software version
----------------------------------------------------------------------
Make sure that all software currently used are terminated before
starting to upgrade, then you can upgrade version by starting the
update.exe file contained in the same folder as this.
Since an installer starts, please operate it according to a screen
display.

A default installation folder is "C:\ProgramFiles\TOA\N-8000". 
Configuration files are stored in following folder;

(Windows XP)
 "C:\Documents and Settings\All Users\Application Data\TOA\N-8000"
(Windows Vista)
 "C:\ProgramData\TOA\N-8000"

After copy completion, restart N-8000 software; if "Help" is chosen 
from the menu bar, "Version data" can be displayed. Please confirm being
displayed as "Version 4.0.0" in the dialog.


Copyright (c) TOA Corporation.@All rights reserved.